Description

MATEK F411-WING

STM32F411, MPU6000, INAVOSD, BMP280, 2x UARTs, 1x Softserial, 1x I2C, 2x Motors & 5x Servos, 2x BEC & current sensor on board.

 

 

FC Specifications

  • MCU: 100MHz STM32F411
  • IMU: MPU6000 accelerometer/gyro (SPI)
  • Baro: BMP280 (I2C)
  • OSD: INAV OSD w/ AT7456E chip
  • Blackbox: No
  • VCP & 2x UARTs
  • 2x Motors, 5x Servos outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Built in inverter for SBUS input (UART1-RX)
  • SoftSerial_Tx1: ST1 pad by default
  • PPM: ST1 pad with softserial disabled
  • Battery Voltage Sensor: 1:10 (Scale 1100)
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: No

FC Firmware

  • INAV Flight
  • Target: MATEKF411

PDB

  • Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 78A,  3.3V ADC,  Scale 423

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V via jumper
  • Continuous current: 3 Amps

BEC 3.3V output

  • Designed for Baro / Compass module/ OLED and Spektrum RX
  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 24 x 24mm, Φ2mm
  • Dimensions: 41 x 28 x 10mm
  • Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)

 

F411-WING Mapping