Description

MATEK 1.2/1.3GHZ VIDEO TRANSMITTER (630mW) – VTX-1G3-2CH

1.3GHz FPV?!?! Yes! Thank you Matek! The new 630mW 1.2/1.3GHz VTX, a Fatshark-bay-style 1.2/1.3GHz Video Receiver (Standalone Too! w/ HV power input pads), and a Dipole Antenna Set! Buy the Transmitter and the Receiver w/2X Dipole Antennas today and start flying long-range FPV w/the highly reliable 1.2/1.3GHz band!

 

THIS IS THE US VERSION!!!….THE ONLY VERSION THAT’S LEGAL TO USE IN THE US!

MATEK VIDEO TRANSMITTER 1.2/1.3GHZ

Features & Specifications

  • 2CH_US version (1258MHz & 1280MHz)
  • 9CH_INTL version (1080MHz to 1360MHz)
  • RF power output 28dBm (630mW)
  • 6-36V DC IN (2-8S LiPo)
  • Button control and LED indicators
  • Built-in AGC microphone
  • Power Consumption: <2.5W
  • Video format: NTSC or PAL
  • Audio Subcarrier: 6.5 MHz & 6.0MHz
  • RF Connector: SMA
  • Weight: 9g ( w/o antenna)
  • Size: board 36*21.5mm

Pads

  • + IN-: 6-36V DC input with reverse polarity protection
  • VID: Video input
  • G: Ground
  • 5V: onboard regulator output, Max. 1.5A load on this pad
  • Aud: Audio 6.5MHz input, onboard microphone shares this rail.
  • TX & RX: UART for firmware update

Includes

  • 1x 1.2/1.3G Video transmitter VTX-1G3-9(INTL version) or VTX-1G3-2(US version)
  • 1x Dipole antenna_SMA, center freq 1240MHz

Settings

  • Press and hold the button 2 seconds to enter the frequency setting. Frequency LED blinks
  • Press the button to select the frequency
  • When the LED blinks at new frequency, no RF output on this frequency.
  • New frequency and output will be enabled if no button action within 3 seconds

*** CMS control is not supported for now

*** 2CH US version is locked to 1258 & 1280MHz, can’t be unlocked to 9CH via firmware update.