Description

MATEK ANALOG AIRSPEED SENSOR ASPD-7002

SPECIFICATIONS:

  • Input Voltage: 4.8~5.2V DC
  • Working current: 20mA
  • Sig pad: 0.5~4.5V output
  • 1/2 pad has voltage divider built-in, 0.25~2.25V output.
  • Pressure range: -2 to 2 kPa (-0.3 to 0.3 psi)
  • Speed range: -200 to 200 km/h
FC FC ADC Pad ASPD-7002 INAV Ardupilot
F405-WING RSSI 1/2 pad CLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save		 ARSPD_TYPE    2
ARSPD_PIN     15
F405-CTR
F405-STD		 RSSI 1/2 pad CLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save		 ARSPD_TYPE    2
ARSPD_PIN     9
F722-STD RSSI 1/2 pad CLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save		 /
F722-SE PA4
(Rear of board)		 1/2 pad set pitot_hardware = ADC /
F722-WING AirS Sig pad set pitot_hardware = ADC /
F411-WSE AirS Sig pad set pitot_hardware = ADC /
F765-WING AirS Sig pad set pitot_hardware = ADC ARSPD_TYPE     2
ARSPD_PIN     10
F411-WING*** ST1pad 1/2 pad CLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save		 /

*** use Target variant MATEKF411_RSSI for F411-WING,  Analog RSSI input is on ST1 pad. softserial_tx1 will be available on the LED pad.

 

 

 

 

WIRING: