Description

MATEK FLIGHT CONTROLLER F722-SE

STM32F722, MPU6000 & ICM20602, BMP280, OSD, SD Card Slot, 5x UARTs, 8x DShot, PDB, Current Sensor, BEC 5V, VTX power switcher, Dual Camera image switcher.

MATEK F722-SE

MATEK F722-SE

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • Baro: BMP280 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: MicroSD card slot (SPI)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
  • 4x individual ESC power/signal pads
  • 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

PDB Specifications

  • Input: 6~36V (3~8S LiPo) w/TVS protection
  • PDB: 4x35A (Max.4x46A)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Current Sensor 184A (Scale 179)
  • Battery Voltage Sensor: 1:10 (Scale 110)

FC Firmware

  • BetaFlight / INAV
  • Target: MATEKF722SE

Physical

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions:  36 x 46 mm
  • Weight: 10g

Including

  • 1x FC F722-SE
  • 6x silicon grommets M4 to M3
  • 1x FR4 PCB Plate 36*36*1mm
  • 1x Rubycon ZLH 35V/470uF (Low ESR)
MATEK F722-SE FC

MATEK F722-SE FC